Single Cylinder 2 Post Car Lift
Maximized vertical space utilization with flexible N+1 column layout to double your parking capacity effortlessly.
Optimizing space in private residential garages and commercial parking lots requires efficient engineering that minimizes installation complexity and site footprint.
The ELEVO PARKER single-cylinder hydraulic parking system resolves spatial constraints through four primary structural innovations:
Double Parking Capacity: Utilizes an N+1 column-sharing configuration (A+B shared post design) that saves up to three posts across a 4-unit array, reducing material costs by over 20% while doubling parking capacity.
Obstacle-Free Vehicle Access: Eliminates front column beams and narrows the overall structural width from 2.5 m to 2.48 m, providing clear, unobstructed entry and exit for passenger sedans and light SUVs.
Fast & Reliable Hydraulic Operation: Powered by a 2.2 kW pure copper motor and a 12L oil tank, the drive system executes full lifting and lowering cycles within 45 seconds at a speed of 1.8m/min.
Modular Engineering & Simple Assembly: Standardized cold-bent C-section steel components enable fast site assembly without complex field cutting or welding.
The ELEVO PARKER system utilizes an electro-hydraulic mechanism driven by an enlarged 45 mm hydraulic piston rod:
Hydraulic Pressurization: Engaging the key switch or remote control activates the 2.2kW motor. Hydraulic fluid flows through an integrated EV1 solenoid valve into the 45 mm cylinder, extending the heavy-duty piston.
Mechanical Interlocking & Lowering: High-hardness quenched alloy lock blocks engage at 17 vertical positions. During descent, a 500 mm safety foot-protection height sensor enforces a brief pause to prevent accidental injury before full platform release.
Evaluating the ELEVO PARKER Single Cylinder 2 Post Car Lift against conventional market alternatives highlights specific engineering and material upgrades:
| Technical Indicator | ELEVO PARKER Single Cylinder Lift | Standard Market Alternatives | Engineering & Operational Significance |
| Main Column Backplate | 6mm Structural Steel | 4.5 mm Thin-plate welding | 33% thicker backplate prevents structural twisting under continuous 2.3 t loads. |
| Hydraulic Piston Diameter | 45 mm Reinforced Rod | 35mm Standard Piston | Delivers higher lifting stability and lower operating pressure for SUV compatibility. |
| Overall Frame Width | 2.48 m Optimized Footprint | 2.5 m Traditional Width | Narrows exterior width to better fit standard domestic and international garage bays. |
| Parameter | Product Specification Value |
| Parking Vehicle Size | 5000*1850*1550 mm |
| Maximum Rated Capacity | ≤ 2,700 kg (Suitable for standard sedans & light SUVs) |
| Power Unit & Tank Capacity | 2.2kWPure Copper Motor / 12 L Oil Reservoir |
| Lifting Height & Speed | Max Lifting Height: 2.1m (84 in) / Speed: 1.8 m/min |
| Maximum Access Cycle Time | ≤ 45 seconds |
| Operating Voltage Options | AC 220V / 380V, 50Hz |
The ELEVO PARKER Single Cylinder 2 Post Car Lift incorporates full mechanical, electrical, and physical safety mechanisms:
Dual Lock Anti-Fall Mechanism: Combines mechanical locks made of high-hardness quenched alloy blocks with electrical solenoid controls. The system continuously locks at 17 vertical notch positions during ascent, maintaining a firm mechanical hold even during hydraulic line pressure loss.
Infrared Photoelectric Sensors & 500 mm Foot Guard: Integrated infrared light grids continuously monitor the lower bay footprint. When lowering, the platform automatically halts at a 500 mm ground clearance threshold to prevent foot injuries before requiring confirmed lower-stage execution.
Wheel Positioning & Buffer Protection: Equipped with front anti-collision buffer bars and tire positioning plates to guide drivers during parking.
Fully Enclosed Anti-Pollution Galvanized Deck: Corrugated corrugated panels prevent oil, water, and melting snow from dripping onto the vehicle parked below.
Target Application Scenarios
Private Garages & Residential Villas: Fits within residential garages to double parking capacity for multi-car families without exterior building expansion.
Automotive Dealerships & 4S Showrooms: Enables high-density vertical vehicle staging in indoor commercial showrooms and inventory holding facilities.
Commercial Properties & Office Buildings: Provides low-cost retrofits to increase parking availability in central office complexes, hotels, and public parking lots.
Municipal & Property Engineering Projects: Integrates as standardized modular equipment into new commercial development designs.
The ELEVO PARKER Single Cylinder 2 Post Car Lift provides a durable, space-optimized solution for vertical vehicle stacking across residential and commercial settings. Built with 45 mm hydraulic cylinder, 17-level mechanical anti-fall locks, and an optimized 2.48 m structural width, this Simple Car Lift delivers reliable performance with low maintenance demands.
Q: Why is a Single Cylinder 2 Post Car Lift suitable for car lifts for home garage installations?
A: A Single Cylinder 2 Post Car Lift is suitable for home garages because its 2.48 m exterior frame width fits, operating on standard AC 220V,380V power to double parking capacity without major civil construction.
Q: What safety mechanisms protect vehicles and operators on this Simple Car Lift?
A: This Simple Car Lift integrates a dual mechanical-electrical system consisting of 17-level quenched alloy anti-fall locks, infrared photoelectric sensors with a 500 mm foot-guard pause, and front wheel-positioning buffer bars.
Q: How does the ELEVO PARKER lift prevent upper-vehicle fluid leaks onto the lower car?
A: The ELEVO PARKER lift prevents fluid contamination by utilizing a fully enclosed 2.0mm galvanized wave-plate deck with an integrated anti-drip tray that collects oil, road sludge, and rainwater.
Ready to Discuss Your Project?